Skip to content

Tips to replace the spring in Your Garage Door

Garage doors are installed for the safety of your vehicle which you park in your garage. Nowadays, there are several types of garage doors that are available in the market to be operated automatically.

These types of garage doors are operated through remote control to provide you convenience and comfort. If you have installed an automatic garage door, you will experience that it will offer you convenience like, you don’t have to soak in heavy rain to operate the garage door by hand.

If you want that your garage door will function smoothly, you will have to pay special attention to its torsion springs. They are used to provide powerful strength to make the garage door open and close efficiently and smoothly. When you realized that your garage door springs are not functioning properly, you will have to replace them as soon as possible. Although it is a very dangerous and tricky job, therefore, you need to consult professional garage door services such as, Raleigh garage door torsion spring replacement to restore the performance of garage door torsion springs. But if you still want to do it on your own, the following steps will help you to install, adjust, and replace the springs safely.

Before conducting the garage door spring replacement job, you will have to measure the size of the spring. There are many sizes of springs to choose from according to the weight and mechanism of the garage door. You will experience that different weight of garage door needs different sizes of springs. It is important to replace the springs with the same broken spring in the garage door. After getting the accurate measurements of the old spring which needs to be replaced with the new one. It is time to buy a new high-quality spring according to the measurements. To get help in this regard, you need to consult a professional garage door company to perform this task. Here it is important to get the right information about the installation of a torsion spring.

You will have to use the right size of socket and wrench to remove the two cones of the broken torsion springs. It will help you to remove the broken springs from their respective safely. Once the broken spring is removed completely, you will have to install a new spring and securely tighten the end cones and mounting brackets.

To complete this task, you will have to use winding tools and steel rods. By using these tools, you will be able to wind required pressure back into the torsion spring. To get the job done safely, you can follow the instructions provided by the manufacturer. 

Once springs are installed successfully, you will have to inspect the garage door to find out further damages. You can conduct this test by examining the garage door assembly. Some garage doors come with two springs, you will have to make sure that another does not malfunction. Test the strength and performance of springs as well. And at the last, you should apply lubricant to all moving hardware of the garage door to make sure that it will function properly.